www.honeywell.com/security
70 | Performance Series IP Cameras User Guide
Figure 3-29 Bonjour Configuration Interface
If you do not know the network camera’s information such as its IP address, you can use
Bonjour’s browser in the same LAN to search for and then access network cameras.
After the network camera is detected by Bonjour, you can see the server name.
Note You can also use Bonjour with the Safari browser.
1. Click Display All Bookmarks in your browser.
2. Open Bonjour.
The system should automatically detect network cameras through Bonjour on the LAN.
Multicast
Multicast is a transmission mode for data packets. When there are multiple hosts to receive the
same data packet, multiple cast (multi-cast) is the best option for reducing the bandwidth and
the CPU load. The source host can send out just one data packet. This function depends on the
relationship between group members and the router’s group.
In the Multicast configuration interface, you can set the multicast address and port.
Note You also need to go to the Live interface to set the protocol to Multicast.
To Next Page
Loading...
Need help?
General