Web Operation | 49
800-18161V1 - A - 07/2014
Table 3-6 Camera Configurations
Parameter Function
Profile Select from Normal, Day, Night.
Brightness Adjusts monitor brightness. Choosing a higher value increases the
video brightness. Adjustments to this value affects the brightness of
the video. Select from 0 to 100. The recommended range is between
40 to 60. The default is 50.
Note If this value is too high, then the video can become hazy.
Contrast Adjusts monitor contrast. Choosing a higher value increases the
contrast. Select from 0 to 100. The recommended range is between 40
to 60. The default is 50.
Note If this value is too low, then the video can become hazy.
Note If this value is too high, then the dark parts of the video could
lose details, and the bright parts of the video could become
overexposed.
Saturation Adjusts monitor color saturation. Choosing a higher value increases
the color saturation/strength. This value has no effect on the general
brightness of the video. Select from 0 to 100. The recommended range
is between 40 to 60. The default is 50.
Note You might see a distortion in grays if the white balance is off.
Sharpness Adjusts video sharpness. Choosing a higher value increases the
sharpness of the video. Select from 0 to 100. The recommended range
is between 40 to 60. The default is 50.
Note Choosing a higher value can introduce video noise to the
image.
Anti-flicker Outdoor: In Outdoor mode, you can select any exposure mode to
avoid flicker.
50Hz: When the current is 50Hz, the system can automatically adjust
the exposure according to the environment’s brightness to prevent
stripes in the video.
60Hz: When the current is 60Hz, the system can automatically adjust
the exposure according to the environment’s brightness to prevent
stripes in the video.
To Next Page
Loading...
Need help?
General