ScanPal EDA61K Mobile Computer 79
Note: To learn about changing the symbology settings, see Change the Scanner Settings on
page 32.
EX20 Imager Reading Distances
The depth of field measurements were taken using these parameters:
• Distances are measured from the front of the engine.
• +23 °C (+73 °F), 10 lux
• Photographic quality codes
Note: Time to Read and Depth of Field are impacted if the barcode symbol is at the edge of
the image.
Standard 2 of 5 Disable OCR Disabled
Interleaved 2 of 5 Enable Digimarc Disabled
Matrix 2 of 5 Disable TLC 39 Disabled
MSI Disable
Telepen Disable
Trioptic Disable
UPC/EAN
Settings
Enabled
UPC-A Enabled
UPC-E Enabled
1D Symbologies 2D Symbologies Postal Codes
Default Default Default
Focus Standard Range
Symbology Near Distance Far Distance
10 mil Code 39 mm 150.11 1350.01
in. 5.91 53.15
13 mil EAN-UPC mm 150.11 1600
in. 5.91 62.99
10 mil DM mm 150.11 900
in. 5.91 35.43
55 mil DM mm 350.01 4514
in. 13.78 177.17
100 mil DM mm 710 11000
in. 27.95 433.07
To Next Page
Loading...
Need help?
General