CHAPTER
4
ScanPal EDA61K Mobile Computer 43
USE THE PHONE
You can use the phone feature to make and receive phone calls as well as transmit
data through wireless wide-area networks (WWANs).
Note: Phone features are only supported on EDA61K WWAN models (EDA61K-1).
About the Phone
Phone features on the computer include a speaker and a microphone. You can also
use a Bluetooth headset or hands-free kit.
On EDA61K-1 WWAN models the phone feature is enabled by default and supports
all cellular radio access technologies (2G, 3G, 4G, etc.) for voice and data
connections around the globe. These features are certified by PTCRB, GCF, and all
major US carriers.
After you turn on the phone and activate service with your wireless carrier, you can
customize the phone features and network settings in the Wireless & Networks
section of the Settings app.
Note: Both WWAN radios support Network Information and Time Zone (NITZ) messages to
automatically set the system time.
Activate the Phone
You use a SIM card to activate the phone on your EDA61K WWAN model computer
(EDA61K-1). You can purchase the micro SIM card from your network provider.
1. Press and hold the Power button until the options menu appears.
2. Tap Power Off.
3. Remove the battery from the computer, Refer to page 6.
To Next Page
Loading...
Need help?
General