ScanPal EDA61K Mobile Computer 5
About the Battery
The computer uses a rechargeable Li-ion battery as its main power source. Several
factors determine the life of your battery, such as display brightness, display
timeout, input device, extreme temperature, and usage. Honeywell recommends
that you keep the battery charged at all times to prevent data loss.
EDA61K computers are designed for use with battery model CK65-BTSC
manufactured for Honeywell International Inc. CK3 battery models AB17, AB18,
and 1001AB01 may be used with the EDA61K. See the CK3 User Guide for more
information.
Note: To view specifications specific to your battery model, see the battery insert supplied
with the battery.
For a list of compatible charging accessories for the EDA61K mobile computer
series and their part numbers, see the EDA60K/EDA61K Accessory Guide,
available for download from the EDA61K product page at www.honeywellaidc.com.
Contact your local sales representative for replacement battery ordering
information.
Charge the Battery Before Use
Before using EDA61K, computers ship with the battery significantly discharged of
power. Fully charge the battery before using your computer for the first time.
You can charge the battery with a EDA61K charging accessory before or after you
install the battery in the computer. A fully discharged battery charges in
approximately 5 hours.
Note: CK3 battery models AB17, AB18, and 1001AB01 can take up to 1 to 2 additional
hours to reach a full charge when battery is fully discharged. See the CK3 User Guide
for more information.
Note: Using the computer while charging the battery increases the time required to reach
a full charge.
Model Battery P/N
CK65-BTSC
50149348-001
Caution: Read Battery Recommendations and Safety Precautions on page 11
and all cautionary markings on the battery, charging peripheral, and
device using the battery before attempting to install, use, or charge
the battery.
Warning: Ensure all components are dry prior to mating the computers and
batteries with peripheral devices. Mating wet components may cause
damage not covered by the warranty.
To Next Page
Loading...
Need help?
General