25
MAN0530 Issue 09 October 03 Searchline Excel
2104M0506
Black 0V
Red +24V
Green/ GND
Yellow
+24V DC supply
0V DC supply
Junction Box
Reverse these connections
to disable turbo-heating
Transmitter
connections
Control cabinet
connections
Instrument (clean)
earth
Tx +24V
Tx 0V
Cable shield
112
)
Notes:
1. Only Transmitters have turbo mode heating which can be disabled. The Receiver uses
proportional heating, which cannot be disabled.
2. Even with turbo mode heating disabled the Transmitter window still receives standard
levels of heating.
3. Do not reverse the Receiver power supply connections. This will not damage the unit,
but the unit will not work.
3.5 UNPACKING
(1) Carefully unpack the equipment, observing any instructions that may be printed on or
contained within the packaging.
(2) Check the contents for damage and against the packing note for deficiencies.
In the event of damage or loss in transit, notify the carrier and Zellweger Analytics or your
local agent immediately.
The gas detector consists of the subsequent items.
Where alternative component sizes are given the size depends on the version of unit,
i.e.mid/long range version or short range version.
1 x Receiver Unit 1 x Transmitter Unit
3. INSTALLATION AND OPERATION
To Next Page
Loading...
Need help?
General
