Honeywell SRX2 User Manual

7. Slide the knob into the slot until it snaps into place.
8. Position the strap to go around the back of your head. The strap swivels
freely on the two knobs so that it can be positioned at the back of the head
for either right-ear or left-ear wearing of the headset.
Replacing an Earpad on the SRX2/SRX3 Headset
1. Hold the headset so that the earpad faces you and the electronics module
faces away.
2. Grasp the earpad and earpad plate assembly and rotate them to the left to
unlock the plate from the headband.
3. Lift the pad and plate assembly off of the headband.
4. Install the replacement pad.
1. Remove the ear pad by pulling it away from the ear pad
plate.
2. Slide one side of the new pad over the edge of the ear
pad plate and gently stretch the pad until it covers the
plate.
3. Ensure that the lip of the new pad completely covers
the ear pad plate all the way around.
SRX3 User Guide - Preliminary 20

Honeywell SRX2 Specifications

General

Brand	Honeywell
Model	SRX2
Category	Headsets
Language	English