EasyManuals Logo
Home>Honeywell>Headsets>SRX2

Honeywell SRX2 User Manual

Honeywell SRX2
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
l Low Power Pairing Mode
Low power pairing mode is the default pairing mode for SRX2/SRX3
headsets. In this mode, a headset will answer a Bluetooth device inquiry with
a very low power response that transmits within a small area (a few feet or
so, depending on the receiving capabilities of the inquiring device).
Limiting the wireless transmission helps to avoid an unwanted cross pairing
(a pairing with a Bluetooth address other than the target) by forcing the
headset to be in close proximity to the device.
l High Power Pairing Mode
High power pairing mode allows the headset and device to be separated by
more distance because the headset’s response to inquiries is a wider
transmission.
Honeywell recommends using high power pairing only if low power pairing
fails. Use this mode with care: While high power pairing mode makes it more
likely that the connection will succeed, it also increases the likelihood of
cross pairing.
If the configuration parameter SrxAutoPairEnable is enabled and the
configuration parameter SrxHighPowerPairingDelaySeconds is set to 0,
headsets will skip lower power pairing mode and enter high power mode.
l TouchConnect
You can pair an A700 or A700x device and an SRX2 or SRX3 headset by
touching them. This method essentially eliminates the chance of cross
pairing and it is quicker and easier than the other methods.
Placing Headsets in Pairing Modes
Initial Headset
State
SRX2/SRX3 Controls Pairing Mode Result
Off Press and release Power button Low power pairing mode
On and paired
Press and release Plus (+) and
Minus (-) buttons
Current pairing broken and headset enters
low power pairing mode
On in low power
pairing mode
Press and release Plus (+) and
Minus (-) buttons
High power pairing mode
Breaking a Pairing
There are several methods to break a pairing between a Vocollect wireless
headset and a Bluetooth device.
From the
Device:
A device can break a pairing with a wireless headset by initiating a
new search for headsets. The user can initiate the device query by
45 SRX3 User Guide - Preliminary

Table of Contents

Other manuals for Honeywell SRX2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell SRX2 and is the answer not in the manual?

Honeywell SRX2 Specifications

General IconGeneral
BrandHoneywell
ModelSRX2
CategoryHeadsets
LanguageEnglish

Related product manuals