holding down the Plus (+) and Minus (-) buttons on the device. This
method is useful if the user’s device completes a cross pairing with
the wrong headset; the user can initiate another manual pairing.
Manual pairing must be enabled on the device for this procedure to
work.
From
VoiceConsole:
VoiceConsole displays all Bluetooth pairings including the
headsets, Talkman devices, scanners, and printers. From the Edit
Device page, you can clear a pairing. You can do this with headsets
as well.
From an
SRX2 or
SRX3
Headset:
The headset user can break any pairing by pressing the Plus (+)
and Minus (-) buttons.
This is the preferred method for breaking a
pairing. The headset signals the device that the
pairing is being broken (see SRX2 note below).
NOTE
For SRX2 users: If the paired device is
running a version of Vocollect
VoiceCatalyst prior to 1.2, the pairing
breaks only after it times out.
Headset Pairing FAQ
Q: My device accidentally paired with a different headset. What can I do?
A: If you are using an SRX2 or SRX3 headset, press the + and - buttons
simultaneously to clear the pairing.
Q: The users at my site do not have assigned headsets and devices, so they
could get a different headset at every shift. Which pairing process would you
recommend?
A: With an A700 or A700x device (VoiceCatalyst only) and an SRX2 or SRX3
headset, you can use TouchConnect to pair the device and headset.
With earlier devices, auto pairing would probably be the easiest, as it will quickly
establish connections and by default does not maintain those pairings.
Q: The users at my site are assigned their own headsets, so I want to maintain
pairings and avoid pairing headsets at the start of every shift. What pairing
process would you recommend?
A: You could use manual pairing or auto pairing with the configuration
parameter SrxPersistAutomaticPairing or, in VoiceClient 3.9 and later and
VoiceCatalyst 2.0 and later, PersistSrxPairingAcrossPowerCycle set to 1 and
SRX3 User Guide - Preliminary 46
To Next Page
Loading...
Need help?
General
