Honeywell VisionPRO 8000 User Manual

33-00066EFS—01 29
Adjusting dehumidification settings: residential use
This feature can control a dehumidifier or
use your air conditioner to reduce humidity.
1 Touch MENU and select Dehumidification.
2 Select Auto.
3 Touch s or t to select humidity level.
4 Touch Done to save your settings. Touch
Cancel to ignore changes.
NOTE: If your air conditioner is used to
control humidity, the temperature may
drop up to 3° F below your temperature
setting until humidity reaches the desired
level.
MCR34130
Dehumidification
Equipment Status
MCR34131
Dehumidification
Off Auto
MCR34100

Honeywell VisionPRO 8000 Specifications

General

Display	Touchscreen
Programmability	7-day programmable
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Energy Star Certified	Yes
Backup Battery	Yes
Filter Change Alert	Yes
Installation	Wall-mounted
Connectivity	Wi-Fi
Power Source	Battery or Hardwired
System Compatibility	Heat pump, Gas, Oil, Electric
Stages	2 heat/2 cool
Display Type	Touchscreen
Temperature Range	40°F to 90°F
Humidity Control	Yes
Compatibility	Compatible with most heating, cooling, and heat pump systems