Honeywell VisionPRO 8000 User Manual

38 33-00066EFS—01
Disconnecting your Wi-Fi network
If you need to disconnect the thermostat
from your Wi-Fi network (for example,
you’re replacing your router), follow these
steps:
1 Touch MENU.
2 Select Wi-Fi Setup.
3 Scroll down to select Disconnect Wi-Fi
Network. Select Yes. The thermostat
will display a question to confirm your
selection.
4 Touch Yes to confirm that you want to
disconnect from the network.
5 The screen will display “Disconnecting
Please Wait.”
6 The screen will show “Wi-Fi
Disconnected Successfully.” Touch
Done. The thermostat will display the
Wi-Fi Setup screen.
M35369
M35371
M35368
M35370

Honeywell VisionPRO 8000 Specifications

General

Display	Touchscreen
Programmability	7-day programmable
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Energy Star Certified	Yes
Backup Battery	Yes
Filter Change Alert	Yes
Installation	Wall-mounted
Connectivity	Wi-Fi
Power Source	Battery or Hardwired
System Compatibility	Heat pump, Gas, Oil, Electric
Stages	2 heat/2 cool
Display Type	Touchscreen
Temperature Range	40°F to 90°F
Humidity Control	Yes
Compatibility	Compatible with most heating, cooling, and heat pump systems