Honeywell VisionPRO 8000 User Manual

33-00066EFS—01 3
Quick reference: residential use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set
a program schedule.
Current status. Shows system mode (heat/
cool), outdoor temperature and humidity (with
optional outdoor sensor).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Permanent Hold.
Indoor conditions. Shows indoor temperature
and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is
active or system is set to EmHeat. Flashes
for battery-only power; on continuous if
system powered.
The screen lights when you
press any button. It stays lit for
7 seconds after you complete
changes. Depending on how your
thermostat was installed, the
screen light may always be on.

Honeywell VisionPRO 8000 Specifications

General

Display	Touchscreen
Programmability	7-day programmable
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Energy Star Certified	Yes
Backup Battery	Yes
Filter Change Alert	Yes
Installation	Wall-mounted
Connectivity	Wi-Fi
Power Source	Battery or Hardwired
System Compatibility	Heat pump, Gas, Oil, Electric
Stages	2 heat/2 cool
Display Type	Touchscreen
Temperature Range	40°F to 90°F
Humidity Control	Yes
Compatibility	Compatible with most heating, cooling, and heat pump systems