Push connector and converter to-
gether and twist until the projec-
tions on the converter fit into the
holes on the hose connector. This
unit should remain assembled for
all future tool use.
Using cleaning tools
A. Attach converter
Disconnect cleaner from elec-
trical outlet. Cleaner must not be
plugged in when positioning or
removing converter.
With cleaner in upright position,
grasp handle and lean cleaner
backwards until bag is flat on the
floor and underside is accessible.
Turn lock on converter so that the
serrated portion is in line with the
hose.
Pivot converter until it covers the
opening.
Place projections on converter
onto rim on bottom plate of
cleaner.
Place edge of lock in slot on
cleaner and turn lock to secure
converter.
Raise cleaner to upright position.
10
To Next Page
Loading...
Need help?
General
