Hoover Concept one User Manual

ON-OFF "Power Surge"
switch
Operate your cleaner at normal
speed by pushing the switch down
one position. To turn cleaner off,
push switch up.
Normal Speed is to be used for
regular cleaning of carpet and rugs
and when using cleaning tools.
Your cleaner is also equipped with
a Power Surge switch. When the
switch is pushed down as far as
possible it is in the Power Surge
speed.
"Power Surge" Speed is to be
used for extra cleaning power on a
heavily soiled area of carpet. Slide
the switch down as far as possible
and hold it in that position to en-
gage the "POWER SURGE"
speed. When the switch is re-
leased, it will return to the NOR-
MAL speed position.
Note: When cleaning any floor
covering, turn cleaner "OFF"
when unattended, particularly on
non-carpeted floors. The agitator
cleans so thoroughly that opera-
tion while the cleaner is stationary
may mar the floor covering.
OFF
NORMAL-a
'POWER
SURGE"
i
i
Special features
Edge cleaning
Brushed edge cleaning is provided
on the right side of the cleaner to
remove imbedded dirt in carpet
near baseboards and furniture.
Guide the right side of the cleaner
parallel to the edge of carpet or
furniture for brushed edge clean-
ing.
Standard edge cleaning is provid-
ed on the left side of the cleaner.
Standard edge cleaning removes
surface dust and litter.

Hoover Concept one Specifications

General

Brand	Hoover
Model	Concept one
Category	Vacuum Cleaner
Language	English