9 of 37
Indesit Company
Service Manual UK English
CONTROL PANEL INTERFACE
TEMPERATURE CONTROL PANEL
BUTTON DESCRIPTION FUNCTION
A Freezer
temperature
adjust / select
~ This function allows you to adjust the displayed temperature.
To adjust the temperature press the relevant + / - button until the
required freezer temperature is displayed on the left.
B Super freeze ~ This function activates the super freeze (fast freeze) so fresh
food can be frozen. To enable press until the super freeze
symbol appears on the Display. It will automatically disable after
48 hours or when the button is pressed again.
C Stand-by function ~ This function turns off the refrigerator and freezer compartments
to enable press and hold for 3 seconds: the display will go out
and a dash will appear on the left display.
To disable press and hold for 3 seconds: the display will return to
the previous set temperatures.
D Reset ~ This function can be used in the event of an alarm when an
acoustic signal and relevant indicator lights are activated.
To disable the acoustic alarm signal press the reset button.
E Fridge
temperature
adjust / select
~ This function allows you to adjust the displayed temperature.
To adjust the temperature press the relevant + / - button until the
required fridge temperature is displayed on the right.
F Holiday function ~ This function allows the fridge compartment to be deactivated if
the user is going away for sometime, the fridge will maintain
adequate temperature for preventing the formation of odours,
therefore not necessary to switch the appliance off.
B+F Control panel
Lock function
(Child lock)
~ This function locks the fridge and freezer controls.
To lock press and hold both the super freeze and super cool
buttons simultaneously for 3 seconds until the lock symbol
appears in the display and is accompanied by an acoustic signal.
C
D
E
F
To Next Page
Loading...
Need help?
General
