ACE Salt Water Sanitizing System Page 1
Welcome
Congratulations on your purchase of the ACE
®
salt water sanitizing system which
generates chlorine and powerful mixed oxidants naturally, making it easy to keep spa
water sparkling clean.
Product Contents
Your complete ACE salt water sanitizing system kit includes:
• Owner’s Manual
• Cell (accessible through spa’s filter compartment)
• Vanishing Act
™
Calcium Remover
• FreshWater
®
Spa Salt
• Cell-cleaning Bottle
• 5-way FreshWater Test Strips
• FreshWater Salt Test Strips
• Controller, Power Supply, Hardware, and Installation Instructions
NOTE: Installation of the ACE salt water sanitizing system can only be done on
Hot Spring
®
and Limelight
®
spas, and must be performed by an authorized Hot
Spring technician to ensure proper operation. The ACE salt water sanitizing sys-
tem is compatible with all Hot Spring spas built on or after August 1, 2009 and
Limelight spas built after August 1, 2010. Your local Hot Spring dealer can verify
if your spa is ACE system-ready.
Purchase these items separately from your local Hot Spring dealer. Not included:
• Clean Screen
™
Pre-Filter
• Additional Vanishing Act Calcium Removers (if necessary)
• Hot Spring Freshwater chemicals for balancing and start-up including
Concentrated Chlorinating Granules, pH Up, pH Down.
Overview of the ACE System
The ACE salt water sanitizing system makes water care easy by:
• Naturally generating active oxygen, powerful mixed oxidants like ozone and
MPS non-chlorine oxidizer, and natural chlorine to keep water crystal clear.
• Generating the right amount of sanitizer needed based on spa size and Use
Level, parameters that are easily input through your spa’s control panel.
• Testing for high or low salt levels, using the ACE system Salt Test.
• Increasing chlorine levels to meet high chlorine-demand situations as needed
with a convenient Boost function.
• Alerting you when your spa needs maintenance with the flashing green Hot
Spring On/Ready Indicator light.