3. In the Diagnostics section, follow the on-screen instructions to select and download
the Remote UEFI version for the product.
Customizing Remote HP PC Hardware Diagnostics UEFI settings
Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can
perform several customizations.
● Set a schedule for running diagnostics unattended. You can also start diagnostics
immediately in interactive mode by selecting Execute Remote HP PC Hardware
Diagnostics.
● Set the location for downloading the diagnostic tools. This feature provides access to
the tools from the HP website or from a server that has been precongured for use.
Your computer does not require the traditional local storage (such as a hard drive or
USB
ash drive) to run remote diagnostics.
● Set a location for storing the test results. You can also set the user name and
password that you use for uploads.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press f10 to enter
Computer Setup.
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Exit, then select Save Changes and Exit to save your settings.
Your changes take eect when the computer restarts.
92 Chapter 8Using HP PC Hardware Diagnostics
To Next Page
Loading...
Need help?
General
