HP 5890 Series II User Manual

SVC 4-17
k. Secure the collector mount to the thermal strap using three screws.
l. Connect the ignitor wire lead connector at the mating connection adjacent to the ignitor.
n. Install the right side panel and secure using four screws.
o. Install the electronics carrier top cover.
8. Restore all gas supplies.
9. Restore power to the HP 5890 Series II.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com

HP 5890 Series II Specifications

General

Brand	HP
Model	5890 Series II
Category	Measuring Instruments
Language	English