Local port operation 24
Flag Description
Control used to set flag position
Accessing the Flag dialog box
From the Main dialog box ("Accessing the Main dialog box" on page 17), click Setup>Flag. The Flag
dialog box appears.
Displaying the status flag
1. From the Flag dialog box ("Accessing the Flag dialog box" on page 24), select Name or EID to
determine what information appears.
2. Select Displayed to show the flag constantly, or select Timed to display the flag for only five seconds
after soft switching.
3. Select a flag color in Display Color.
4. In the Display Mode, select Opaque for a solid-color flag or Transparent to see the desktop through
the flag.
5. Position the status flag on the desktop:
a. Click Set Position to gain access to the Position Flag screen.
b. Left-click and hold the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
6. Choose one of the following options:
o Click OK to save settings.
o Click X to exit, or press the Esc key to exit without saving settings.
NOTE: Changes made to the position flag are not saved until you click OK in the Flag dialog
box ("Accessing the Flag dialog box" on page 24).
To Next Page
Loading...
Need help?
General
