Local port operation 30
2.
Enter the password, and then click OK.
Removing the password protection
1. From the Main dialog box ("Accessing the Main dialog box" on page 17), click Setup>Security.
2. Choose one of the following options:
o In the Security dialog box, click the New field and press the Enter key.
o Double-click the New field, leave the New field blank, and press the Enter key.
3. Choose one of the following options:
o Click the Repeat field and press the Enter key.
o Double-click the Repeat field, leave the Repeat field blank, and press the Enter key.
4. Click OK if you want to eliminate the password.
Resetting a console switch password
1. Press any key on the keyboard, or move the mouse. The Authorize dialog box appears.
2. Enter help in the password field. A dialog box appears with an HP technical support phone number
(1-800-474-6836), a 16-bit key, and the EID number of the console switch.
3. Call HP technical support ("HP contact information" on page 47). Give the service person your 16-
bit key and EID number of the console switch. A one-time unlock code, which is specific to your
console switch, is given to you.
4. Enter the one-time unlock code in the field.
5. Click OK. Your previous console switch password is deleted.
To Next Page
Need help?
General
