HP AF600A - Server Console Switch User Manual

Installing the HP KVM Server Console Switch G2 8
5.
Secure the console switch to the rails using two M-6 screws, one on each side.
Performing a cantilever-mount installation
1. Remove the four screws, two on each side, from the console switch.
2. Attach the short 1U brackets to the console switch as indicated in step 2 ("Performing a standard-
mount installation" on page 7) of performing standard-mount installation.
3. Install up to six cage nuts.

HP AF600A - Server Console Switch Specifications

General

Brand	HP
Model	AF600A - Server Console Switch
Category	Switch
Language	English