Power
Software Guide 2–7
Initiating or Resuming from Hibernation
Task Procedure Result
Initiate
Hibernation
■ In Windows 2000, select
Start > Shut down >
Hibernate, then select the
OK button.
■ In Windows XP, select
Start > Turn Off Computer
> Hibernate. (If the
Hibernate option is not
displayed, press and
hold the shift key.)
■ If Hibernation has been
configured, briefly press
the power button.
■ The power/Standby
light turns off.
■ The screen clears.
Allow the system
to initiate
Hibernation
(with
Hibernation
enabled)
No action required.
■ If the notebook is running
on battery power, the
system initiates
Hibernation after 30
minutes of notebook
inactivity or when the
battery pack(s) reaches
a critical low battery
condition.
■ If the notebook is attached
to external power, the
system will not initiate
Hibernation.
■ Power settings and
timeouts can be changed
in the Power Options
window.
■ The power/Standby
light turns off.
■ The screen clears.
(Continued)
333634-001.book Page 7 Friday, July 18, 2003 8:47 AM