EasyManuals Logo
Home>HP>Laptop>Compaq nc6000

HP Compaq nc6000 Software Guide

HP Compaq nc6000
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
6–6 Software Guide
MultiBoot
Setting a MultiBoot Express Prompt
To set the notebook to display the MultiBoot startup location
menu each time the notebook is started or restarted with
Computer Setup:
1. Open Computer Setup by turning on or restarting the
notebook. Press
f10 while the F10 = ROM Based Setup
message is displayed in the lower left of the screen.
To change the language, press f2.
For navigation instructions, press f1.
2. Use the arrow keys to select Advanced > Boot Options, then
press
enter.
3. In the Express Boot Popup Delay (Sec) field, select the length
of time in seconds that you want the notebook to display
the startup location menu before it defaults to the current
MultiBoot setting. (When 0 is selected, the Express Boot
startup location menu is not displayed.)
4. To save your settings and exit Computer Setup, use the arrow
keys to select File > Save Changes and Exit, then follow the
instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the notebook restarts.
Entering MultiBoot Express Preferences
When the Express Boot Menu is displayed during startup:
To specify a startup location from the Express Boot menu,
select your preference within the timeout, then press
enter.
To prevent the notebook from defaulting to the current
MultiBoot setting, press any key before the timeout occurs.
The notebook will not start up until you select a startup
location and press
enter.
To allow the notebook to start up according to the current
MultiBoot setting, wait for the timeout to expire.
333634-001.book Page 6 Friday, July 18, 2003 8:47 AM

Table of Contents

Other manuals for HP Compaq nc6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nc6000 and is the answer not in the manual?

HP Compaq nc6000 Specifications

General IconGeneral
DisplayLCD
TV-in portNo
Modem speed56 Kbit/s
Internal modemYes
Multi-bay devicesTweede batterij, tweede vaste schijf, diskettedrive
Power supply typeAC 90~264V, 1.6A, 47-63 Hz, 4/50 kV
Dimensions (WxDxH)318 x 262 x 34 mm
Wireless technologyIEEE 802.11b/g, Bluetooth
TV-out typeS-Video
Charging port typeDC-in jack
PS/2 ports quantity0
USB 2.0 ports quantity2
CardBus PCMCIA slot typeType III
Pointing deviceTouchpad
HDD speed4200 RPM
Optical drive typeDVD-ROM
Total storage capacity40 GB
Compatible memory cardsSD
Audio systemPremier Sound 16-bits
Storage temperature (T-T)20 - 60 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)10 - 90 %
Non-operating relative humidity (non-condensing)5 - 90 %
Processor cache1 MB
Processor frequency1.7 GHz
Processor cache typeL2
Internal memory0.5 GB
Internal memory typeDDR-SDRAM
Maximum internal memory2 GB
Display diagonal14.1 \
Display resolution1024 x 768 pixels
Native aspect ratio4:3
Discrete graphics card modelAMD Mobility Radeon 9600
Maximum graphics card memory0.064 GB
Networking featuresEthernet/Fast Ethernet/Gigabit Ethernet
Motherboard chipsetIntel® 855PM
Bundled softwareAcrobat Reader
Operating system installedWindows XP Professional
Number of battery cells6
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth262 mm
Width318 mm
Height34 mm
Weight2300 g

Related product manuals