EasyManuals Logo
Home>HP>Laptop>Compaq nc6000

HP Compaq nc6000 Software Guide

HP Compaq nc6000
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
6–4 Software Guide
MultiBoot
2. Use the arrow keys to select the Advanced menu > Device
Options.
To enable bootable media in USB drives or in drives
inserted into a Port Replicator, select Enable USB legacy
support.
To enable a NIC, select Internal Network adapter boot.
3. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and
take effect when the notebook restarts.
To connect a NIC to a Preboot eXecution Environment (PXE) or
Remote Program Load (RPL) server during startup without using
MultiBoot, quickly press
f12 when the Network Service Boot
message appears in the lower right corner of the screen.
Understanding MultiBoot Results
Before changing the startup sequence, consider the following:
When the notebook restarts after the boot order has been
changed, it considers only the first device of each drive type
when searching for a startup device.
For example, the notebook is connected to a Port Replicator
with an optical drive and a diskette drive. In the default boot
sequence, the optical drive comes before the diskette drive.
If the system fails to boot to the optical drive (either because
it does not contain a disc or because the disc is not bootable)
it does not try to boot the diskette drive. Instead, it tries to
boot the first hard drive device present in the system.
Changing the boot sequence also changes the logical drive
designations. For example, if you start up from a CD-ROM
drive with a disc that boots as drive C, that CD-ROM drive
becomes drive C, and the hard drive in the hard drive bay
becomes drive D.
333634-001.book Page 4 Friday, July 18, 2003 8:47 AM

Table of Contents

Other manuals for HP Compaq nc6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq nc6000 and is the answer not in the manual?

HP Compaq nc6000 Specifications

General IconGeneral
DisplayLCD
TV-in portNo
Modem speed56 Kbit/s
Internal modemYes
Multi-bay devicesTweede batterij, tweede vaste schijf, diskettedrive
Power supply typeAC 90~264V, 1.6A, 47-63 Hz, 4/50 kV
Dimensions (WxDxH)318 x 262 x 34 mm
Wireless technologyIEEE 802.11b/g, Bluetooth
TV-out typeS-Video
Charging port typeDC-in jack
PS/2 ports quantity0
USB 2.0 ports quantity2
CardBus PCMCIA slot typeType III
Pointing deviceTouchpad
HDD speed4200 RPM
Optical drive typeDVD-ROM
Total storage capacity40 GB
Compatible memory cardsSD
Audio systemPremier Sound 16-bits
Storage temperature (T-T)20 - 60 °C
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)10 - 90 %
Non-operating relative humidity (non-condensing)5 - 90 %
Processor cache1 MB
Processor frequency1.7 GHz
Processor cache typeL2
Internal memory0.5 GB
Internal memory typeDDR-SDRAM
Maximum internal memory2 GB
Display diagonal14.1 \
Display resolution1024 x 768 pixels
Native aspect ratio4:3
Discrete graphics card modelAMD Mobility Radeon 9600
Maximum graphics card memory0.064 GB
Networking featuresEthernet/Fast Ethernet/Gigabit Ethernet
Motherboard chipsetIntel® 855PM
Bundled softwareAcrobat Reader
Operating system installedWindows XP Professional
Number of battery cells6
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth262 mm
Width318 mm
Height34 mm
Weight2300 g

Related product manuals