Computer Setup
Software Guide 8–3
4. To confirm the restoration, press f10.
5. Select File > Save Changes and Exit, then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you may have entered is saved.
Selecting from the File Menu
Select To Do This
System information
■ View identification information about
the notebook and any battery packs
in the system.
■ View specification information about
the processor, memory and cache
size, video revision, keyboard
controller version, and system ROM.
Save to floppy Save system configuration settings to a
diskette.
Restore from floppy Restore system configuration settings
from a diskette.
Restore defaults Replace configuration settings in
Computer Setup with factory default
settings. (Identification information is
retained.)
Ignore changes and exit Cancel changes entered during the
current session, then exit and restart the
notebook.
Save changes and exit Save changes entered during the current
session, then exit and restart the
notebook. The changes you save are
in effect when the notebook restarts.
333634-001.book Page 3 Friday, July 18, 2003 8:47 AM