Removal and Replacement Procedures
Maintenance and Service Guide 6–13
6.7 MultiBay II Device
1. Prepare the computer for disassembly (Section 6.3).
2. Position the computer with the right side toward you.
3. If it is installed, remove the PM2.0×5.0 security screw 1 that
secures the MultiBay II device to the computer.
4. Gently press in on the left side of the device 2 to unlock it.
5. Slide the device 3 from the computer.
Removing the MultiBay II Device
Reverse the above procedure to install a MultiBay II device.
MultiBay II Device Spare Part Number Information
8X Max DVD-ROM drive
DVD+RW/R and CD-RW Combo Drive
DVD/CD-RW Combo Drive
373314-001
375557-001
373315-001
To Next Page
Loading...
Need help?
General