HP D2D Installation And Configuration Guide

2. Slide the HP StoreOnce Backup System into position in the rack and secure it to the rack rails.
• HP D2D4300 Series: Ensure it clicks into place with the retaining latches on the unit's
front bezel.
• HP D2D4100 and 2500 Series: Secure it to the rack rails using thumbscrews on the unit's
front bezel.
IMPORTANT: The label on the top of the HP StoreOnce Backup System contains useful
identity information, such as the MAC address and default network name. Make a note of
this information before you install the HP StoreOnce Backup System in the rack. On HP
D2D2500 Series products there is also a pull-out strip in the front panel with the serial number
and port ID.
Figure 8 Secure the HP D2D2500 Series Backup System to the rack
Figure 9 Secure the HP D2D4100 Series Backup System to the rack
14 Connecting and installing the HP StoreOnce Backup System

HP D2D Specifications

General

Brand	HP
Model	D2D
Category	Storage
Language	English