DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN17050-1
______________________________________________________________________
Supplier's Name: Hewlett-Packard Company DOC#: RSVLC-1004B_03182011
Supplier's Address: 8000 Foothills Blvd.
Roseville, CA 95747-5502
U.S.A.
declares, that the product
Product Name
2
: HP E2620-48 Switch
Product Model(s): J9626A
Regulatory Model Number
1
: RSVLC-1004B
Product Options: None
.
conforms to the following Product Specifications and Regulations:
EMC: Class A
EN 55022:2006 +A1 :2007
EN 55024:1998 +A1:2001 +A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1:2001 +A2 :2005
FCC CFR 47 Part 15 2008
Safety:
EN 60950-1:2006 +A11:2009
IEC 60950-1:2005
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference; and, (2) this device must accept any interference received,
including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC, and carries the CE-marking accordingly.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports. This
number should not be confused with the marketing name or the product numbers.
2) This product was tested with HP branded products only.
Roseville, 18-March-2011
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-
TRE, Herrenberger Straße 140, D-71034 Böblingen (FAX: + 49-7031-14-3143)
To Next Page
Loading...
Need help?
General