To Next Page

To Previous Page

Memory module

Description Spare part number

16 GB 937438-850

8 GB 937236-850

4 GB L10598-850

Before removing a memory module, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 29).

5. Remove the battery (see Battery on page 31).

Remove the memory module:

1. Lift the memory cover o the system board.

NOTE: The memory cover is available in the Bracket Kit using spare part number L28674-001.

2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.

(The memory module tilts up.)

Component replacement procedures 35

Other manuals for HP EliteBook 1050 G1

Questions and Answers:

Need help?

Do you have a question about the HP EliteBook 1050 G1 and is the answer not in the manual?

General