To Next Page

To Previous Page

6 Computer Setup (BIOS), TPM, and HP Sure

Start

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and

output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup

includes settings for the types of devices installed, the startup sequence of the computer, and the amount of

system and extended memory.

NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from

operating properly.

Starting Computer Setup

▲

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.

Using a USB keyboard or USB mouse to start Computer Setup (BIOS)

You can start Computer Setup by using a keyboard or mouse connected to a USB port, but you must rst

disable FastBoot.

1. Turn on or restart the computer, and when the HP logo appears, press f9 to enter the Boot Device

Options menu.

2. Clear the check box for Fast Boot.

3. To save your changes and exit, select the Save icon in the lower-right corner of the screen, and then

follow the on-screen instructions.

– or –

Select Main, select Save Changes and Exit, and then press enter.

Your changes go into eect when the computer restarts.

Navigating and selecting in Computer Setup

●

To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or

use a pointing device to select the item.

●

To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or

use the up arrow key or the down arrow key on the keyboard.

●

To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow

the on-screen instructions.

Using Computer Setup 67

Other manuals for HP EliteBook 1050 G1

Questions and Answers:

Need help?

Do you have a question about the HP EliteBook 1050 G1 and is the answer not in the manual?

General