To Next Page

To Previous Page

Bottom speakers

Description Spare part number

Bottom speakers (includes cable) L28672-001 (Speaker Kit)

Before removing the bottom speakers, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 29).

5. Remove the battery (see Battery on page 31).

Remove the speakers:

Left speaker

1. Disconnect the speaker cable from the system board (1).

2. Remove the speaker cable from the clips (2).

3. Remove the two Phillips M2.0×2.0 screws (3) that secure the speaker to the computer.

4. Remove the speaker (4).

Right speaker

1. Disconnect the speaker cable from the system board (1).

2. Remove the speaker cable from the clips (2).

3. Remove the two Phillips M2.0×2.0 screws (3) that secure the speaker to the computer.

Component replacement procedures 43

Other manuals for HP EliteBook 1050 G1

Questions and Answers:

Need help?

Do you have a question about the HP EliteBook 1050 G1 and is the answer not in the manual?

General