HP EliteOne 800 G1 Service Manual

NFC sensor board
Description Spare part number
NFC sensor board 732503-001
The NFC sensor board is located just above the right speaker (when viewed from behind). It sits inside
of a plastic holder and has two small cables connected to it. The location of the board and an image of
the board housed in its holder is shown in the following images.
To remove the NFC sensor board:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 34).
2. Remove the stand (see
Stand on page 36).
3. Remove the access panel (see
Access panel on page 40).
4. Remove the lower rear panel (see
Lower rear panel on page 73).
NFC sensor board
81

HP EliteOne 800 G1 Specifications

General

Brand	HP
Model	EliteOne 800 G1
Category	Desktop
Language	English