HP FlexNetwork MSR3024 User Manual

7
Installing the router
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
• The barcode on the router chassis contains product information that must be provided to local
sales agent before you return a faulty router for service.
• Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to
open the chassis, contact Hewlett Packard Enterprise for permission. Otherwise, Hewlett
Packard Enterprise shall not be liable for any consequence.
Installation prerequisites
• You have read "Preparing for installation" carefully.
• All requirements in "Preparing for installation" are met.
Installation flowchart
You can install the router on a workbench or in a rack. Select an installation method according to the
installation environment, and follow the installation flowchart shown in Figure 3.

HP FlexNetwork MSR3024 Specifications

General

Device Type	Router
Form Factor	Rack-mountable
Ports	24 x 10/100/1000Base-T
Switching Protocol	Ethernet
Data Transfer Rate	Up to 1 Gbps
Product Type	Router
Routing Protocols	BGP, OSPF, RIP
Management	CLI, Web, SNMP
Power Supply	AC
Width	440 mm
Depth	420 mm
Operating Temperature	0 °C to 40 °C
Operating Humidity	10% to 90% non-condensing