37
• The power source voltage meets the requirement of the router.
• The console cable is properly connected, the terminal or PC used for configuration has started,
and the configuration parameters have been set.
• If a CF card is used, verify that the CF card is in position.
• Make sure the installed HMIMs/MIMs are in position.
Powering on the router
1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power supplies.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare........
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* HPE MSR3064 BootWare, Version 1.60 *
* *
****************************************************************************
Copyright (c) 2010-2015 Hewlett Packard Enterprise Development LP
Compiled Date : Dec 17 2015
CPU ID : 0x4
Memory Type : DDR3 SDRAM
Memory Size : 2048MB
BootWare Size : 1024KB
Flash Size : 8MB
cfa0 Size : 247MB
CPLD Version : 2.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file cfa0:/msr3000-cmw710-system-e000603.bin........................
...............................Done.
Loading file cfa0:/msr3000-cmw710-security-e000603.bin.........Done.
Loading file cfa0:/msr3000-cmw710-voice-e000603.bin...........Done.
Loading file cfa0:/msr3000-cmw710-data-e000603.bin............Done.
Loading file cfa0:/msr3000-cmw710-boot-e000603.bin.......................
Done.
To Next Page
Loading...
Need help?
General
