WLAN antennas
To remove the WLAN antennas, use these procedures and illustrations.
Table 5-10 WLAN antennas description and part number
Description Spare part number
WLAN antennas N85228-001
Before removing the WLAN antennas, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 28).
2. Remove the bottom cover (see Bottom cover on page 28).
3. Remove the battery (see Battery on page 29).
4. Remove the system board (System board on page 39).
Remove the WLAN antennas:
1. Remove the cables from the routing paths and clips (1) under the system board.
2. Peel the antennas (2) off the computer.
To install the WLAN antennas, reverse this procedure.
Lock bracket
To remove the lock bracket, use these procedures and illustrations.
Before removing the lock bracket, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 28).
2. Remove the bottom cover (see Bottom cover on page 28).
3. Remove the battery (see Battery on page 29).
WLAN antennas
43