27
Connecting the 650W AC power supply
1. Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2. Use a cable tie to secure the power cord to the handle of the power supply, as shown in Figure
33.
3. Con
nect the other end of the power cord to an AC power outlet.
Figure 33 Connecting the 650W AC power supply
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply
Connecting the 650W DC power supply
CAUTION:
The power cord color code scheme in Figure 34 is for
illustration only. The cable delivered for your
country or region might use a different color scheme. When you connect the power cord, always
identify the polarity symbol on its wires.
To connect the 650W DC power supply:
1. Unpack the DC power cord, identify the plug for connecting to the power supply, orient the plug
with the power receptacle on the power supply, and insert the plug into the receptacle
(see Figure 34).
The re
ceptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
2. Use a cable tie to secure the power cord to the handle of the power supply, as shown in Figure
33.
3. Con
nect the other ends of the wires to the DC power source wiring terminals, with the negative
wire (– or L–) to the negative terminal (–) and the positive wire (+ or M/N) to the positive terminal
(+).
To Next Page
Loading...
Need help?
General