HP HPE FlexFabric 5930 User Manual

57
Figure 59 SFP+ network cable
(1) Connector (2) Pull latch
NOTE:
As a best practice, use HPE SFP transceiver modules, SFP+ transceiver modules, or SFP+ network
cables for the SFP+ ports on the switch. The HPE SFP transceiver modules, SFP+ transceiver
modules, and SFP+ network cables are subject to change over time. For the most up-to-date list of
SFP transceiver modules, SFP+ transceiver modules, and SFP+ network cables, contact Hewlett
Packard Enterprise Support or marketing staff.
For more information about HPE SFP transceiver modules, SFP+ transceiver modules, and SFP+
network cables, see HPE Transceiver Modules User Guide.
QSFP+ port
The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA/HPE 5930-2Slot+2QSFP+/HPE
5930-2Slot+2QSFP+ TAA switches provide fixed QSFP+ ports. The LSWM18QC, LSWM124XGT2Q,
LSWM124XG2Q, LSWM124XG2QL, and LSWM124XG2QFC interface modules provide QSFP+
ports. You can install 40G QSFP+ transceiver modules in Table 19, 40G QSF
P+ network cables
in Table 20, a
nd 40G QSFP+ to SFP+ network cables in Table 21 in the QSFP+ ports as needed.
Table 19 40G QSFP+ transceiver modules available for the QSFP+ ports
Product
code
HPE
description
Central
wavelengt
h
(nm)
Connecto
r
Fiber type
and
diameter
(µm)
Modal
bandwidt
h (MHz ×
km)
Max
transmissi
on
distance
JG325B
HPE X140 40G
QSFP+ MPO
SR4
Transceiver
850 MPO
Multi-mode,
50/125
2000
100 m
(328.08 ft)
4700
150 m
(492.12 ft)
JG709A
HPE X140 40G
QSFP+ MPO
MM 850nm
CSR4 300m
Transceiver
850 MPO
Multi-mode,
50/125
2000
300 m
(984.25 ft)
4700
400 m
(1312.33 ft)
JG661A
HPE X140 40G
QSFP+ LC LR4
SM 10km
1310nm
Transceiver
Four lanes:
• 1271.
• 1291.
• 1311.
• 1331.
LC
Single-mode,
9/125
N/A
10 km (6.21
miles)

HP HPE FlexFabric 5930 Specifications

General

Brand	HP
Model	HPE FlexFabric 5930
Category	Switch
Language	English