HP HPE FlexFabric 5930 User Manual

43
No terminal display
The configuration terminal has no display when the switch is powered on.
To resolve the problem:
1. Verify that the power system is operating correctly.
2. Verify that the console cable has been connected correctly and no fault occurs on the console
cable.
3. Verify that the following settings are configured for the terminal:
{ Baud rate—9600.
{ Data bits—8.
{ Stop bits—1.
{ Parity—None.
{ Flow control—None.
4. If the problem persists, contact Hewlett Packard Enterprise Support.
Garbled terminal display
The configuration terminal displays garbled text.
To resolve the problem:
1. Verify that the following settings are configured for the terminal:
{ Baud rate—9600.
{ Data bits—8.
{ Stop bits—1.
{ Parity—None.
{ Flow control—None.
2. If the problem persists, contact Hewlett Packard Enterprise Support.

HP HPE FlexFabric 5930 Specifications

General

Brand	HP
Model	HPE FlexFabric 5930
Category	Switch
Language	English