2-26
Using the ProCurve Web Browser Interface
Web Configuration
Using the ProCurve Web
Browser Interface
Modifying a VLAN
1. Use the VLAN Setup page to modify a VLAN. Under the VLAN List section,
click on the radio button of the VLAN you would like to modify.
2. Click MODIFY.
3. Select the ports to be added to or removed from this VLAN.
4. Click APPLY.
Deleting a VLAN
1. Use the VLAN Setup page to delete a VLAN. Under the VLAN List section,
click on the radio button of the VLAN you would like to delete.
2. Click DELETE.
Note Before deleting a VLAN, make sure that all the ports in this VLAN are also a
member of another VLAN. Otherwise, the port will not be a member of any
VLAN.
Field Attributes
Add VLAN
• VLAN ID – Input a VLAN ID and click APPLY to create a new VLAN.
VLAN List
• VLAN List – The list of up to 64 VLANs. You can modify or delete
these VLANs.
To Next Page
Loading...
Need help?
General
