To Next Page

To Previous Page

Enhancements

KA.15.09.0003 was the first KA.15.09 software version for the HP 3800 switches. KA.15.09 includes many enhancements not

found in KA.15.03 software, listed below.

Version KA.15.09

Authentication

Dynamic Port Access Auth via RADIUS

■ Enhancement (PR_0000060972)—Enables configuration of RADIUS attributes for downstream supplicant

devices. This allows a common port policy to be configured on all access ports by creating new RADIUS HP vendor-

specific attributes (VSAs) that will dynamically override the authentication limits. For more information, see the

chapter “RADIUS Authentication, Authorization, and Accounting” in the Access Security Guide for your switch.Fields

Added to Authentication Requests

Fields Added to Authentication Requests

■ Enhancement (PR_0000063932) —For improved interoperability with Cisco ACS, fields are now added in

authentication requests for management TELNET, SSH, and HTTP service. For more information, see the chapter

“RADIUS Authentication, Authorization, and Accounting” in the Access Security Guide for your switch.

BGP

BGPv4

■ Enhancement (PR_0000073705)—Border Gateway Protocol (BGP) support has been added. For more

information, see the “BGP (Border Gateway Protocol)” chapter in the Multicast and Routing Guide for your switch.

BGP MD5 Authentication

■ Enhancement (PR_0000073738, CR_0000078395)—Adds support for BGP MD5 authentication. See “BGP

(Border Gateway Protocol)” in the Multicast and Routing Guide.

BGP Route Maps

■ Enhancement (PR_0000065723, CR_0000072572)—Adds support for BGP route maps. See “BGP (Border

Gateway Protocol)” in the Multicast and Routing Guide.

BGP Route Filtering and Peer Restart Time Display

■ Enhancement (PR_0000102845, CR_0000102845)—Adds support for filtering BGP routes by adding the option

bgp to show ip route, and for displaying the BGP peer's graceful restart time with show ip route bgp neighbor. See “BGP

(Border Gateway Protocol)” in the Multicast and Routing Guide.

CDP

Accept CDP/LLDP Packets Tagged for VLAN 1

■ Enhancement (PR_0000065164) —Allows incoming CDP and LLDP packets tagged for VLAN 1 to be processed

even if VLAN 1 does not contain any ports. For more information, see the chapter “Configuring for Network

Management Applications” in the Management and Configuration Guide for your switch.

HP J9575A User Manual

Questions and Answers: