HP MSM3xx Reference Guide

CLI commands
(Different means older or newer. This enables you to return to a previous firmware version if
required).
Configuration settings are preserved during the update unless stated otherwise in the release
notes for the firmware. However, all active connections will be terminated. Users will have to log
in again after the AP restarts
firmware-update start
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update start
Upload the firmware based on a specified URI. This URI can be set with the command: firmware-
update uri.
firmware-update time
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update time <time>
Sets the time of day the scheduled firmware upgrade will take place.
Parameters
<time> Time as hh:mm:ss. For example: 15:44:00.
firmware-update uri
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update uri <uri>
Sets the URI where the AP will retrieve new firmware.
no firmware-update uri
Clears the firmware URI.
firmware-update weekday
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
firmware-update weekday (everyday | monday | tuesday | wednesday | thursday |
friday | saturday | sunday)
Sets the day when the scheduled firmware upgrade will take place.
snmp-server trap firmware-update
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
snmp-server trap firmware-update
Send a trap on firmware update.
no snmp-server trap firmware-update
Do not send a trap on firmware update.
2-31

HP MSM3xx Specifications

General

Brand	HP
Model	MSM3xx
Category	Wireless Access Point
Language	English