CLI commands
The service controller will only accept authentication/location-aware information from satellites
that have a matching shared secret to its own.
radius-server profile
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
radius-server profile <name>
Creates a new RADIUS profile or switches to the RADIUS context with the specified profile name.
no radius-server profile <name>
Deletes the specified RADIUS profile.
ip-qos profile
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
ip-qos profile <name>
Creates a new IP QoS profile or switches to the IP QoS context with the specified profile name.
no ip-qos profile <name>
Deletes the specified IP QoS profile.
dot11 igmp snooping-helper
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
dot11 igmp snooping-helper
Enables IGMP snooping helpers which ensure that the AP correctly delivers multicast packets to
roaming client stations that are part of a multicast group.
no dot11 igmp snooping-helper
Disable IGMP snooping helpers.
discovery protocol
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
discovery protocol
Enables broadcast of device information for interoperability with CDP-enabled networking
hardware.
no discovery protocol
Disable broadcast of device information.
discovery protocol device-id
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
discovery protocol device-id <name>
Overwrite the device-id field of information packets (the AP serial number is not used).
no discovery protocol device-id
Do not overwrite the device-id field of information packets (use the AP serial number).
2-36
To Next Page
Loading...
Need help?
General
