CLI commands
vlan compatibility mode
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
vlan compatibility mode
When this option is enabled, the AP sends all management traffic AND all untagged traffic on both
the default VLAN and untagged.
no vlan compatibility mode
Disable VLAN and untagged compatibility mode.
vlan-management filter
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
vlan-management filter
Restricts the default VLAN to carry management traffic only.
no vlan-management filter
Does not restrict the default VLAN to carry management traffic only.
Management traffic includes:
all traffic that is exchanged by the AP and the access controller
all communications with RADIUS servers
HTTPS sessions to the management tool
SNMP traffic
interface vlan
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
interface vlan <id>[-<id2>]
Switches to the specified VLAN interface or create a new VLAN interface with the specified ID.
no interface vlan <id>[-<id2>]
Deletes the specified VLAN interface.
Parameters
<id> VLAN ID. Range: 1 - 4094.
<id2> VLAN ID. When specified, is the last value in a range.
2-44
To Next Page
Loading...
Need help?
General
