CLI commands
mac-filters
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac-filters <address>
Adds an address to the MAC filter list.
no mac-filters <address>
Remove the specified address from the MAC filter list.
Parameters
<address> MAC address. Specify 6 pairs of hexadecimal numbers separated by
colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01
Description
This feature enables you to control access to the AP based on the MAC address of client stations.
You can either block access or allow access, depending on your requirements. When both this
option and the MAC-based authentication options are enabled, the following applies: if a user
MAC address does not appear in the MAC filtering list, then MAC-based authentication takes place
for that user.
mac-filters mode
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac-filters mode (allow | block)
Either allow or block access to the wireless network for client stations whose addresses appear in
the MAC filter list.
mac authentication accounting
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication accounting
Enables RADIUS accounting for this VAP (VSC).
no mac authentication accounting
Disables RADIUS accounting for this VAP (VSC).
mac authentication accounting radius profile
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication accounting radius profile <name>
Sets RADIUS accounting to use the specified RADIUS profile.
no mac authentication accounting radius profile
Disables accounting support for MAC authentication.
mandatory authentication
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mandatory authentication
MAC-based authentication is mandatory.
2-60
To Next Page
Loading...
Need help?
General
