HP Omnibook XE3 Service Manual

2-30 Removal and Replacement HP Omnibook XE3 (Technology Codes GE and GD)
Removing the CPU Module
(HP Authorized Service Providers Only)
Table 2-10. CPU Module Replacement Part Numbers
Description Part Number Exchange Part Number
Module, CPU (AMD Athlon, 1.1 GHz) 1822-0582 F3930-69101
Module, CPU (AMD Athlon, 1 GHz) 1822-0259 F2409-69104
Module, CPU (AMD Athlon, 950 MHz) 1822-0258 F3928-69101
Module, CPU (AMD Athlon, 900 MHz) 1822-0257 F2409-69103
Module, CPU (AMD Duron, 900 MHz) 1822-0580 F3931-69101
Module, CPU (AMD Duron, 850 MHz) 1822-0497 F2410-69102
Module, CPU (AMD Duron, 800 MHz) 1822-0528 F2410-69101
Required Equipment
•
#0 Phillips screwdriver.
•
Small flat-blade screwdriver.
•
AMD CPU removal kit.
Removal Procedure
Caution
Be careful not to touch the upper surface of the CPU module. Handle it only by its edges, or you
could damage it.
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-10).
•
Keyboard (page 2-12).
•
Display assembly (page 2-18).
•
Top case (page 2-22).
•
Hinge saddle set (page 2-25).
•
Heatsink assembly (page 2-29).
3. Carefully place the CPU removal tool over the CPU.
4. Insert the tip of a flat-blade screwdriver into the notch marked OPEN on the CPU mount bracket,
and tilt the screwdriver toward the CPU.
Caution
Make sure the screwdriver applies pressure to the CPU removal tool, and not to the CPU itself.

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English