HP Omnibook XE3 Service Manual

2-34 Removal and Replacement HP Omnibook XE3 (Technology Codes GE and GD)
Removing the CD/DVD Drive
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-10).
•
Keyboard (page 2-12).
•
Hard disk drive (page 2-14).
•
Display assembly (page 2-18).
•
Top case (page 2-22).
•
Hinge saddle set (page 2-25).
2. Pull the drive to the right, off of its connector and out of the notebook.
Figure 2-23. Removing the CD/DVD Drive
Reassembly Notes
•
Place the drive so that its connector aligns with that on the motherboard, then gently press it to the
left and into place.

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English