HP Omnibook XE3 Service Manual

2-38 Removal and Replacement HP Omnibook XE3 (Technology Codes GE and GD)
Replacing the Bottom Case
Installation Procedure
1. Install a new Microsoft Product ID label.
2. Transfer the old serial number label and install a new overlay, or create a new serial number label
using the steps below.
3. If you need to install or replace the PCMCIA doors, refer to the figure below.
Figure 2-25. Installing the PCMCIA Doors

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English