Lock bracket
Table 5-10 Lock bracket description and spare part number information
Description Spare part number
Lock bracket L19470-001
Before removing the lock bracket, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 51).
5. Remove the battery (see Battery on page 53).
Remove the lock bracket:
1. Remove the two Phillips M2.0×4.0 screws (1) that secure the lock bracket to the computer.
2. Remove the lock bracket from the computer (2).
Reverse this procedure to install the lock bracket.
76 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts