Maintenance and Service Guide 5–1
5
Setup Utility (BIOS)
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows
operating system is not working.
The utility reports information about the computer and provides settings for startup, security, and other preferences.
To start the Setup Utility:
■ Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner on the screen, press
f10.
-or-
■ Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner on the screen, press
esc.
When the Startup Menu is displayed, press
f10.
Using the Setup Utility
Changing the language or the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not
already running, begin at step1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility. by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner on the screen, press
f10.
-or-
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner on the screen, press
esc.
When the Startup Menu is displayed, press
f10.
2. Use the arrow keys to select System Configuration > Language and then press
enter.
3. Use the arrow keys to select a language, then press
enter.
4. When a confirmation prompt with your language selected is displayed, press
enter.
5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, then
press
enter.
Your change goes into effect immediately.
To Next Page
Loading...
Need help?
General