D-10
Safety and EMC Regulatory Statements
EMC Regulatory Statements
Safety and EMC Regulatory
Statements
European Community
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
DoC #: RSVLC-0703-11-26-08
Supplier’s Name: Hewlett-Packard Company
Manufacturer's Address: 8000 Foothills Blvd., Roseville, CA 95747 U.S.A.
declares, that the product
Product Name
2
: HP ProCurve 2910al Switch Series
Product Number(s): J9145A, J9147A
Regulatory Model No
1
: RSVLC-0703
Product Options: All
conforms to the following Product Specifications and Regulations:
EMC: Class A
EN 55022:2006/CISPR 22:2005
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2001 + A2:2005
FCC CFR47 Part 15
Safety:
EN 60950-1:2001
IEC 60950-1: 2001
EN 60825-1:1994 +A1+A2 / IEC 60825-1:1993 +A2 Class 1
Supplementary Information:
The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC and carries the CE marking accordingly.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
2) This product was tested with HP branded products only.
Roseville, 26-November-2008
Local contact for regulatory information:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen, Germany
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto, CA 94304, U.S.A. 650-857-1501
To Next Page
Loading...
Need help?
General